Truckin' Raises Prices

Source: U.S. Energy Information Administration, Gasoline and Diesel Fuel Update

Growing octane needs widen premium/regular price spread  

The engine designs increasing the fuel economy of the trucks that are all the rage on Cape Fear are boosting the demand for premium gasoline, increasing the price difference between the high-octane blend and regular gasoline. 
The Energy Information Administration found the difference between U.S. average retail prices for the two grades reached 50 cents per gallon in late 2016, adding it has remained near that level so far in 2017.  
One of the main performance characteristics of motor gasoline is octane, a measure of gasoline’s resistance to spontaneous combustion.  
In the United States, the EIA pointed out, retail gasoline is usually classified by its octane rating: regular gasoline with a typical octane rating of 87 is the least expensive option, and premium gasoline with a typical octane rating of 91 to 93 is the most expensive option.  
The price spread between the two grades of gasoline is most often representative of the cost to produce the additional octane, the Department of Energy agency noted. 

A 12 Year High of Nearly 12%

On the demand side, the premium gasoline share of total motor gasoline sales has steadily increased in recent years, reaching a high nearly 12 percent in August 2016—the highest share since 2004.  
Given 2016's record gasoline consumption, 12 percent represented a lot more gasoline last summer than it did a dozen years earlier. 
Although lower gasoline prices may be making premium gasoline more affordable, the EIA said, the upward trend in premium gasoline sales is more likely driven by changes in fuel requirements for light-duty vehicles in response to increasing fuel economy standards 
To meet these standards, it noted, more car manufacturers are producing models with turbocharged engines that may require or recommend the use of high-octane gasoline. 
This long-running trend has occurred at the same time as costs to produce and supply octane for gasoline have increased, resulting in an increasing price difference, or spread, since 2000 
Energy policy reforms in recent years have promoted the widespread use of ethanol as a source of octane in gasoline, replacing previous octane sources such as tetraethyl lead and methyl tertiary-butyl ether (MTBE).  

The Ethanol Market Challenge

However, there  is limited demand ror -- and challenges associated with -- blending ethanol into gasoline in concentrations greater than 10 percent, the EIA said. The result, ethanol inputs as a percentage of total gasoline consumed approached 10 percent in 2013 and have since plateaued, even as the demand for higher octane blends increased. 
The combination of increasing demand for premium gasoline and market challenges to further increases in ethanol blending has led refiners and blenders to acquire more expensive sources of octane, leading to an increase in the price differential between premium and regular gasoline in recent years. 
Beyond ethanol, other sources of high-octane blending components are produced by downstream units at petroleum refineries. Although total refinery capacity has increased in recent years, there has not been a corresponding increase in the capacity of refining units that produce high-octane blending components. 
A session at next week's 2017 EIA Energy Conference will examine this topic in a session moderated by Lynn Westfall, director of EIA’s Office of Energy Markets and Financial Analysis. Registration to the conference is open through midday on June 23. 
--Jim Brumm

Comments